PS-21
 |
FAQs & Troubleshooting |
PS-21
Date: 01/17/2011 ID: faqh00000477_000
How do I pick up the lower bobbin thread?
- Raise the presser foot and the needle to their highest positions.
- With your left hand, hold the end of the upper thread.
With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position.
- The upper thread should have caught the lower thread in a loop.
Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.
Upper thread
Lower thread loop - Pull out about 15 cm (6") of both threads and place them toward the back of the machine straight behind the presser foot.
The upper thread should pass between the toes of the presser foot.
Upper thread
Lower thread
LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS-30, LS-590, LX-3125/3125E, PS-21, XL-2600/2600i/2610, XL-3500/ t/ i/3510/3520, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.