FAQs & Troubleshooting

Close

LS-1217

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 12/12/2018 ID: faqh00000379_000

When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.

Please check the Bobbin Winder.

If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move.

Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.

 

Related Models

BM2800, BM3730, CE1000, CE-5000/5000PRW, CE5500T, CE6070T, CE8080/CE8080PRW, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, H537ST, HC3010, HC7140, HE-120, HE-240, HE300, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 40, Innov-is 40e, Innov-is 500D, Innov-is 80, Innov-is 85e, Innov-is 900D, Innov-is 950D, Innov-is 990D, JX1400, JX1410, JX1420, JX1710, JX1714, JX2217, JX2417, LB6810, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS-30, LS-590, LX-3125/3125E, LX3850, NX-200, NX-400Q/400, NX-600, PC-210/210PRW, PC-6500, PE-150V, PE-180D, PE-300S, PE-700II/750D(USB), PE-780D, PS-21, PS-3100/3700, SC9500, SE-350, SQ9050, SQ9130, ST371HD, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3710, XR37T, XR6060, XR-65T, XR-7700, XS6060

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.