PE-180D
 |
FAQs & Troubleshooting |
PE-180D
Date: 05/14/2015 ID: faqh00000021_000
Why is the outline sewing off the pattern?
This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.
-
Improper backing material (stabilizer) is put on the fabric.
Thick stabilizer has to be used for elastic or thin fabric.
One Point Advice Fabrics and stabilizer material for embroidery
- The fabric has to be set to the frame tight enough.
One Point Advice Embroidery
- Decrease the upper thread tension manually to the basic thread tension setting or less.
Related FAQs
HE-120, HE-240, HE300, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 4750D, Innov-is 500D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, LB6810, PC-6500, PC-8500/8500D, PE-150V, PE-180D, PE-300S, PE-700II/750D(USB), PE-780D, SE-350, ULT2001/2001N/2001C/2002D/2003D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.