BM3730
 |
FAQs & Troubleshooting |
BM3730
Date: 12/12/2018 ID: faqh00000007_000
Upper threading (Point)
+ Before upper threading, be sure to raise a presser foot (Refer to Fig.A below.) and raise a needle to its highest position.
+ To pass a thread through thread take-up lever and tension discs surely, be sure to guide the thread by your left hand while holding the thread lightly with your right hand. (Refer to Fig.B below)
BM2800, BM3730, CE1000, CE-5000/5000PRW, CE5500T, CE6070T, CE8080/CE8080PRW, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, ES-2000/2000T, EX-660, H537ST, HC3010, HC7140, HE-240, HE300, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 4750D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BQ2450, Innov-is BQ2500, Innov-is BQ3050, Innov-is BQ3100, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is VQ2400, Innov-is VQ3000, JX1400, JX1410, JX1710, JX2217, LB6810, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS-30, LS-590, LX-3125/3125E, LX3850, PE-150V, PE-180D, PE-700II/750D(USB), PE-780D, PS-21, PS-3100/3700, QC-1000, SC9500, SE-350, SQ9050, SQ9130, ST371HD, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3710, XR37T, XR6060, XR-65T, XR-7700, XS6060
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.