MFC-J615W
 |
FAQs & Troubleshooting |
MFC-J615W
Date: 11/27/2019 ID: faq00100637_004
Print command (LPR) (Linux)
CUPS Users Only
The LPR command is not available in CUPS. To configure your machine, use your application's print dialog box or the CUPS web interface "http://localhost:631/printers".
Print Command :
lpr -P (printer name) (filename)
Configuration Command :
brprintconf_(model name) [Option]
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W： brprintconf_mfcj430w
Option Table
| FUNCTION | COMMAND OPTION | PARAMETER EXAMPLE |
| Media | -md [parameter] | -md Plain |
| Resolution | -reso [parameter] | -reso 150x150dpi |
| Bi-Dir Printing | -bidir [parameter] | -bidir ON |
| MirrorPrint | -mirro [parameter] | -mirro True |
| Paper Type | -pt [parameter] | -pt A4 |
| Paper Thickness | -thick [parameter] | -thick Thick |
| Paper Source | -feed [parameter] | -feed AutoSelect |
| Copies | -copy [parameter] | -copy=1 |
| Color Or Mono | -corm [parameter] | -corm Color |
| Color Matching | -cm [parameter] | -cm NATURAL |
| Half Tone | -ht [parameter] | -ht Diffusion |
| Color Enhance | -ce [parameter] | -ce ON |
| Brightness | -brit [parameter] | [-10 - +20] |
| Contrast | -cont [parameter] | [-10 - +20] |
|
Red Key |
-red [parameter] | [-10 - +20] |
| Green Key | -green [parameter] | [-10 - +20] |
| Blue Key | -blue [parameter] | [-10 - +20] |
| Slow Dry | -sd [parameter] | -sd ON |
| Collate copy | -collate [parameter] | -collate ON |
| jpeg print mode | -jpeg [parameter] | -jpeg Recommended |
| Reverse order | -rev [parameter] | -rev ON |
MFC-250C, MFC-255CW, MFC-290C, MFC-295CN, MFC-490CW, MFC-495CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-6890CDW, MFC-790CW, MFC-795CW, MFC-990CW, MFC-J265W, MFC-J415W, MFC-J615W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.