MFC-8910DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc8910dw_us_as.jpg)
MFC-8910DW
Date: 11/07/2012 ID: faq00003023_001
Configure the boot method through the front panel of my Brother machine.
Follow the steps below to configure the boot method.
- Press Menu.
- Press the Up or Down arrow key to choose Network and press OK.
- Press the Up or Down arrow key to choose Wired LAN or WLAN and press OK.
- Press the Up or Down arrow key to choose TCP/IP and press OK.
- Press the Up or Down arrow key to choose Boot Method and press OK.
- Press the Up or Down arrow key to choose Auto, Static, RARP, BOOTP or DHCP and then press OK.
- For all selections, except Static, you will be asked to specify the number of times the machine tries to obtain an IP address - IP Boot Tries. The default is 3. Press OK.
- Press Stop/Exit.
MFC-8710DW, MFC-8910DW, MFC-8950DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.