MFC-210C
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc210c_all.jpg)
MFC-210C
Date: 09/07/2006 ID: faq00000299_001
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set or Menu key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 06 for 2006).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set or Menu key .
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
DCP-110C, FAX-1820C, FAX-1840C, MFC-210C, MFC-3220C, MFC-3240C, MFC-3320CN, MFC-3340CN, MFC-3420C, MFC-420CN, MFC-5440CN, MFC-5840CN, MFC-620CN, MFC-640CW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.