HL-5150D
 |
FAQs & Troubleshooting |
HL-5150D
Date: 08/24/2006 ID: faq00000292_004
What kind of memory can I use?
The DIMM that can be used with the HL-5140, HL-5150D and HL-5170DN must have the following specifications:
| Type: | 100 pin and 32 bit output |
| CAS Latency: | 2 or 3 |
| Clock frequency: | 66 MHz or more |
| Capacity: | 16, 32, 64 Mbyte or 128 Mbyte |
| Height: | 35 mm (1.4 inches) or less |
| Parity: | None |
| DRAM Type: | SDRAM 4 Bank |
For HL-5140 and HL-5150D
The printer has 16 MB of standard memory and a lost for optional additional memory. The memory can be expanded up to a total of 144 MB by installing a commercially available DIMM.
For HL-5170DN
The printer has 32 MB of standard memory and a lost for optional additional memory. The memory can be expanded up to a total of 160 MB by installing a commercially available DIMM.
HL-5140, HL-5150D, HL-5170DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.