"Out of Memory" message with Fax Storage On? When Fax Storage is set to On,  copies of all received faxes are stored in the memory, thus using up a portion of the memory available for other functions. The Fax Storage feature is utilized for Fax Forwarding, Fax Paging and Remote Retrieval. If you do not need these features, verify that Fax Storage is set to Off by doing the following:

1. Press Menu.
2. Press the up or down arrow key to select Fax and press OK.
3. Press the up or down arrow key to select Remote Fax Opt and press OK.
4. Press the up or down arrow key to select Fwd/Page/Store or Forward/Store and press OK.
5. Press the up or down arrow key to select Off and press OK.
6. If you have faxes stored in the memory, you will receive the following message:
   
   
   • Erase All Fax?  1. Yes 2. No
                 --OR--
   • Print All Fax?    1. Yes 2. No
   
   If you press 1(Yes), faxes in the memory will be erased or printed before the setting changes.
   If a backup copy has already been printed it will not be printed again.
   
   If you press 2(No), faxes in the memory will not be erased or printed and the setting will be unchanged.
   

If you do need the features that require Fax Storage to be On, the stored faxes will need to be erased or printed to remove them from the memory and to allow additional memory to be available. Follow these steps to print the stored faxes:

1. Press Menu.
2. Press the up or down arrow key to select Fax and press OK.
3. Press the up or down arrow key to select Remote Fax Opt and press OK.
4. Press the up or down arrow key to select Print Fax or Print Document and press OK.
5. Press Start.
6. After printing is finished, press Stop/Exit.