MFC-9325CW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc9325cw_us_as.jpg)
MFC-9325CW
Date: 11/19/2012 ID: faq00000011_033
White spots or hollow print
Please check the following points to solve the problem:
- The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.
- Click here to see the details of how to install the drum unit.
- Click here to see the details of how to install the toner cartridges.
- The drum unit may be stained. Clean the drum unit as follows:
- Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color of the drum unit causing the problem.
- Clean the drum unit of the color. Click here to see the details of how to clean the drum unit.
- Make sure that the media type settings in the printer driver and in the machine's Paper Type menu matches the type of paper you are using. We recommend trying to change Thick Paper or Thicker Paper mode in the printer driver, and Thick or Thicker in the machine's Paper Type menu setting.
- Check the machine's environment. Conditions such as high humidity can cause white spots or hollow print.
Temperature: 10ºC to 32.5ºC (50ºF to 90.5ºF)
Humidity: 20% to 80% (without condensation)
MFC-9125CN, MFC-9325CW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.