MFC-8910DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc8910dw_us_as.jpg)
MFC-8910DW
Date: 07/25/2019 ID: faq00000006_031
Black lines down the page
Please check the following points:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
-
Clean the corona wire inside the drum unit by sliding the green tab.
> Click here to see how to clean the corona wire.
-
Make sure the green tab of the corona wire is at the home position.
-
The drum unit may be damaged. Put in a new drum unit.
> Click here to see how to replace the drum unit.
-
The toner cartridge may be damaged. Put in a new toner cartridge.
> Click here to see how to replace the toner cartridge.
- The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us".
Related FAQs
DCP-7060D, DCP-7065DN, FAX-2840, HL-2280DW, HL-5440D, HL-5450DN, HL-5470DW, HL-6180DW, MFC-7240, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8710DW, MFC-8910DW, MFC-8950DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.