HL-1450
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl1450_all.jpg)
HL-1450
Date: 04/26/2013 ID: faq00000006_016
Vertical black lines appear on the printout.
![](/g/b/img/faqend/faq00000006_016/ca/en/90024/Black_lines.gif)
Please check the following points:
- Clean the primary corona wire of the drum unit. To see how to clean the corona wire, click here.
- Make sure the primary corona wire cleaner is at the Home posision(▲).
- The drum unit may be damaged. Put in a new drum unit. To see how to replace the drum unit, click here.
- The toner cartridge may be damaged. Put in a new toner cartridge. To see how to replace the toner cartridge, click here.
- Make sure that a torn piece of paper is not inside the pinter covering the scanner window.
- The fixing unit may be smudged. Contact to the Customer Support.
Related FAQs
HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.