MFC-L2720DW
![]() |
Perguntas frequentes e Solução de problemas |
![](/g/b/img/product/mfcl2720dw_us_eu_as.jpg)
MFC-L2720DW
Data: 24/03/2016 ID: faq00000694_031
Document Jam (With Video Instructions)
The document was not inserted or fed correctly, or the document scanned from the ADF was too long.
Clear the document jam in the ADF unit.
Clear any debris or scraps of paper from the ADF unit paper path.
Follow the steps below to take out jammed paper.
![]() |
You can see the steps with video clips.
|
Document is Jammed in the Top or the ADF Unit
- Remove any paper from the ADF that is not jammed.
- Open the ADF cover.
-
Pull the jammed document out to the left. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams.
- Close the ADF cover.
-
Press Stop/Exit or
(Cancel).
Document is Jammed under the Document Cover
- Remove any paper from the ADF that is not jammed.
- Lift the document cover.
-
Pull the jammed document out to the right. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams.
- Close the document cover.
-
Press Stop/Exit or
(Cancel).
Remove Small Scraps of Paper Jammed in the ADF
- Lift the document cover.
-
Insert a piece of stiff paper, such as cardstock, into the ADF to push any small scraps through.
- Close the document cover.
-
Press Stop/Exit or
(Cancel).
DCP-L2540DW, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
Passo 1: quanto as informações nesta página auxiliaram você?
Passo 2: Vvocê gostaria de acrescentar algum comentário?
Note que este formulário é utilizado apenas para comentários.