Veelgestelde vragen en probleemoplossing

Sluiten

QL-810W

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

Datum: 06/01/2021 Nummer: faqp00001466_020

What do the indicator lights mean?

The indicators light and blink to indicate the printer's status.  The following symbols are used in this FAQ to explain the meaning of the different indicator colors and patterns.

 

green is lit / orange is lit / red is lit / blue is lit Indicator is lit in the color shown
green is flashing / orange is flashing / red is flashing / blue is flashing Indicator is flashing in the color shown
Off Indicator is off

 

Status LED Editor Lite LED Wi-Fi LED Condition Solution
green is lit Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 Power is ON -
Feeding mode
Printing mode
Cutting mode
Cleaning mode
Platen roller is rotating

blue is flashing

(Once every 0.5 second)

WPS setup mode
off off Initializing mode
Preparing reset
green is flashing Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 Print preparation mode -
Receiving data
Transferring data
Searching for printer using AirPrint from a mobile device
Canceling print job
Overwriting data (from Printer Setting Tool)
orange is lit Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 The DK Roll Compartment Cover is open. -
off off System OFF mode -

orange is flashing

(Once every 0.5 second)

Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 Cooling mode Wait approximately 10 minutes, and then try printing again.

orange is flashing

(0.3 second × 4 times, then lit)

green is flashing

(0.3 second × 4 times, then lit)

blue is flashing

(0.3 second × 4 times, then lit)

Overwriting data (from printer) Updating the information in the printer.
red is lit off off Boot mode Turn off the printer and then turn it on again. If the problem still occurs, contact Brother Customer Service.

red is flashing

(Once every 1 second)

Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 Media end error Replace the DK Roll with a new one. If there is sufficient tape remaining, install the DK Roll correctly.
-> See "How do I install/change the label roll?".
Feed error Insert the end of the DK Roll correctly.
No media error Load the DK Roll.
-> See "How do I install/change the label roll?".
Wrong media error Load the correct DK Roll.
-> See "How do I install/change the label roll?".
Cover open error Close the DK Roll Compartment Cover correctly.
Communication error ・Transfer of the data failed. When sending a template as a .blf file, the model name in the file is different.
-> Check the data and the connection status between the printer and the computer.
-> See "How do I connect the printer to my computer via Wi-Fi®?".

・The wireless LAN connection was interrupted. Turn off the printer, and the turn the printer on again.
-> See "How do I connect the printer to my computer via Wi-Fi®?".

・For Windows
If this error occurs during 2-color printing, click the [Print] button in P-touch Editor, and then change [Output] to [Standard] in the [Print] dialog box that appears.
If [High Resolution] is selected, you cannot use 2-color printing.
BLF file error Confirm that the model supports .blf files, and then transfer the data again.
Database search error ・There is no database with the specified number. Specify a correct number.
・The search for a template with a linked database fails.
-> Search again.
No template error ・There is no template with the specified number. Specify a correct number.
・When printing a template, the specified template does not exist.
-> Select the correct template, and then print again.
Access point search error

・The access point could not be found.
-> Try to connect again.
・An access point for establishing a connection could not be specified.
-> Confirm the WPS setting environment (distance between the access point and the printer, presence of obstructions, and so on) for the access point, and then configure the WPS settings for the printer again.

Access point connection error If you are using two or more access points, reduce the number of access points to one, and then connect the printer again.
Access point setting error Set the encryption method of the access point to a method other than WEP, and configure the wireless LAN settings using WPS.
For more information about setting the encryption method of the access point, see the instructions provided with your access point.
Security error Configure the wireless settings using WPS again.
Charging required error Connect the AC adapter to the printer.

red is flashing

(0.9 second off + 0.3 second flashing)

Depends on whether the Editor Lite mode is on or off*1 Depends on the status of the wireless connection*2 Cutter error Do not open the DK Roll compartment cover when the cutter is operating.
To clear this error, press any button.

red is flashing

(Once every 0.3 second)

Off Off System error Turn off the printer and then turn it on again. If the problem still occurs, contact Brother Customer Service.

 

*1: green is lit (Editor Lite mode is on) or Off (Editor Lite mode is off)

 

*2: blue is lit (wireless connection is established), blue is flashing (wireless connection is not established or it is being established), or Off (wireless function is off)

 

 

The Battery LED indicators and conditions

 

Battery is installed and AC adapter is connected

Battery LED Condition
orange is lit Charging
Off Charging finished

 

Battery is installed

Battery LED Condition
orange is flashing 0.5 second on + 3.5 seconds off Remaining battery level is half
0.5 second flashing × 2 times + 2.5 seconds off Remaining battery level is low
0.5 second flashing Charging required

Verwante modellen

QL-810W

Neem contact op met de Brother-klantenservice als u nog meer hulp nodig hebt:

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.