Veelgestelde vragen en probleemoplossing



Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing


Niet uw product?

Datum: 09/05/2013 Nummer: faq00000068_023

How do I install additional memory?

Follow the procedure below to install additional memory.

  1. Turn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the printer.


    Always turn off the printer power switch before installing or removing the DIMM.

  2. Remove the two DIMM covers (both the plastic one (1) and the metal one (2)).
  3. Unpack the DIMM and hold it by its edges.


    To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board surface.

  4. Hold the DIMM by the edges and align the notches in the DIMM with the protrusions in the slot. Insert the DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
  5. Put the two DIMM covers back on (both the plastic one (1) and the metal one (2)).

  6. Reconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch.


    To make sure that you have installed the DIMM properly, you can print the printer settings page that shows the current memory size. To see how to print the printer settings, click here.

Verwante modellen

HL-4040CN, HL-4050CDN, HL-4070CDW

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.


Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.