Veelgestelde vragen en probleemoplossing

Sluiten

HL-4040CN

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

HL-4040CN

Niet uw product?

Datum: 23/09/2008 Nummer: faq00002048_008

My Brother machine has no power. What can I do?

If your Brother machine does not appear to have power, please check the following:
 
  1. Is the machine off?
    Press the power switch to turn the machine on.
  2. Is the power cord loose or disconnected?
    Turn the machine off, connect the AC power cord properly and then turn the machine back on.
  3. Is the machine connected to a correctly rated AC outlet?
    Connect the machine to an AC power outlet that you know works and is within the range indicated on the rating label. Do not connect any other equipment to the outlet. Do not connect the machine to an auxiliary power outlet on the back of a computer. If in any doubt, call a qualified electrician.

If this issue cannot be resolved initially, it may be because the machine is in safety mode; safety mode is when the voltage to the machine has been higher than stated on the rating plate causing it to shut down.

Turn off the machine and disconnect the AC power cord. Wait for at least 5 minutes before connecting the AC power cord and turning the machine back on.

(If the AC power cord is connected to soon - less than 5 minutes, then the machine may never recover from safety mode.  Try doing the above one more time if there is still no power to the machine.)

 

If you still cannot resolve the issue, please contact Brother support.

Verwante modellen

DCP-9040CN, DCP-9042CDN, DCP-9045CDN, HL-4040CN, HL-4050CDN, HL-4070CDW, MFC-9440CN, MFC-9450CDN, MFC-9840CDW

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.