Veelgestelde vragen en probleemoplossing

Sluiten

NX-600

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

Datum: 31/03/2016 Nummer: faqh00000124_000

"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?

The "Reverse/Reinforcement Stitch" button, "Needle Position" button or "Thread Cutter" button was pressed while the bobbin winder shaft is moved to the right.

 

 

Each time a key is pressed or an incorrect operation is performed, a beep is sounded.

  • For a correct operation
    One beep is sounded.
  • If an incorrect operation is performed
    Two or four beeps are sounded.
  • If the machine locks up, for example, because the thread is tangled
    The sewing machine continues to beep for four seconds.
    The machine automatically stops.
    Be sure to check for the cause of the error, and correct it before continuing to embroider.

 

Verwante vragen

Verwante modellen

Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 350SE, Innov-is 400, Innov-is 500D, Innov-is 550SE/ 550, Innov-is 600, Innov-is 700E, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is 955, NX-400Q/400, NX-600, PE-180D

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.