TD-4420TN
Veelgestelde vragen en probleemoplossing |
TD-4420TN
Datum: 14/04/2020 Nummer: faqp00001434_011
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Push the print head release button to open the print head mechanism.
- Turn off the printer.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
1. Gap Sensor
2. Black Mark SensorWe recommend cleaning the sensors as required.
< Clean the Tear Bar/ Peel Bar >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Wipe the tear bar or peel bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
1. Tear Bar 2. Peel Bar
< Clean the Exterior/ Interior >
Exterior: Wipe it with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Verwante vragen
TD-4420TN, TD-4520TN
Neem contact op met de Brother-klantenservice als u nog meer hulp nodig hebt:
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.