Set Bar Code Parameters and Enter the Bar Code Data

1. Press the Shift key (  /  ), and then press the Cable Wrap/Barcode key (  /  ).
   The Bar Code Setup screen is displayed.
   * Up to five bar codes can be entered on a label.


2. Press  or  to select an attribute, and then press  or  to set a value for that attribute.

   Characters may not appear below the bar code even when "On" is selected for "Under #", depending on the tape width being used, the number of lines entered, or the current character style settings.

3. Press the OK key to apply the settings.
   * New settings are NOT applied if you do not press the OK key.


4. Type in the bar code data.
   Special characters can be entered in the bar code when using the CODE39, CODE128, CODABAR, GS1-128, QR Code or Data Matrix protocols. When not using special characters, go to step 7.
   


5. Press the Shift key (  /  ), and then press the Faceplate/Symbol key (  /  ).
   A list of characters available for the current protocol is displayed.


6. Press  or  to select a character, and then press the OK key to insert the character in the bar code data.
   


7. Press the OK key to insert the bar code in the label.
   The bar code is displayed on the text entry screen.
   

Bar Code Settings