SDX1250
 |
Veelgestelde vragen en probleemoplossing |
SDX1250
Datum: 14/12/2018 Nummer: faqh00101304_000
Can the cutting machine cut felt, leather and synthetic leather?
Felt with a thickness of about 3 mm and leather or synthetic leather of about 2 mm can be cut.
Use one of the specialized sheets for fabric cutting (Iron-on Fabric Appliqué Contact Sheet (White Backing) or High Tack Adhesive Fabric Support Sheet) when cutting fabric.
Iron-On Fabric Applique Sheet : This is applied to the fabric or suitable material.
High Tack Adhesive Fabric Support Sheet : This is applied to the standard mat for best results.
- For details on the sheets for fabric cutting, refer to Mat, Cutting Blade and Material Combinations, Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.) or Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Applique Contact Sheet.)
- These thickness values are approximate guidelines. Since the values may differ depending on the material or its hardness, always perform a test/trial cut to confirm successful cutting. For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
- Included accessories may vary depending on the machine model. Required accessories not included with the machine may be purchased separately.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.