SDX1000
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hf_sdx1000euk.jpg)
SDX1000
Date: 03/10/2018 ID: faqh00101046_000
Adjusting the Position of the Feed Roller
For normal operations (when the optional roll feeder is not used), it is not necessary to adjust the position of the feed roller.
If the feed roller is inadvertently moved, follow the procedure below to return it to its original position.
For details on using the roll feeder, refer to the manual.
![]() |
(1) Shaft (2) Feed roller (3) Feed roller lock dial (4) Feeder release lever |
-
Pull the feeder release lever toward you to release the shaft.
-
Rotate the feed roller lock dial toward the back to unlock the feed roller, and then move the feed roller to the
mark.
Move the feed roller to themark when the roll feeder is being used.
-
Rotate the feed roller lock dial toward you to lock the feed roller, and then push the feeder release lever to the
position.
Be careful not to pinch your fingers while operating the feeder release lever.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.