SDX2250D
 |
Veelgestelde vragen en probleemoplossing |
SDX2250D
Datum: 28/08/2018 Nummer: faqh00000751_000
"Patterns cannot be welded. There are some patterns which cannot accept or no overlaps." message appearing on the LCD. What does it mean?
The message appears when you are welding patterns.
-
The patterns do not overlap. Rearrange them so the selected patterns overlap. Unifying the pattern, instead, can be an alternative editing method depending on your project.
-
A pattern that has a seam allowance is selected. Deactivate the seam allowance setting and weld the patterns.
- An open shape is selected as a pattern. Only closed shapes can be welded. Unifying the pattern, instead, can be an alternative editing method depending on your project.
Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the Brother customer service or the nearest authorized service center.
CM260, CM300, CM600, CM700, CM840, CM900, SDX1000, SDX1200, SDX1250, SDX2200D, SDX2250D, SDX900
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.