Innov-is XP3
Veelgestelde vragen en probleemoplossing |
Innov-is XP3
Datum: 09/08/2018 Nummer: faqh00000636_002
How do I attach the Embroidery foot "W"?
- When attaching an embroidery foot, always press on the screen. You may accidentally press the Start/Stop button and possibly cause injury.
- Be sure to use embroidery foot W when doing embroidery. Using another embroidery foot may cause the needle to strike the embroidery foot, causing the needle to bend or break and possibly cause injury.
-
Press the Needle Position button to raise the needle.
-
Press to lock all keys and buttons.
* If the message OK to automatically lower the presser foot? appears on the LCD screen, press OK to continue.
-
Raise the presser foot lever.
-
Press the black button on the presser foot holder and remove the presser foot.
(1) Black button
(2) Presser foot holder
-
Loosen the screw of the presser foot holder to remove the presser foot holder.
(1) Multi-purpose screwdriver
(2) Presser foot holder screw
(3) Presser foot holder
-
Position the embroidery foot W on the presser foot bar by aligning the notch of the presser foot to the large screw.
Side view
-
Hold the embroidery foot in place with your right hand, and then use the included multi-purpose screwdriver to securely tighten the presser foot holder screw.
(1) Presser foot holder screw Use the included multi-purpose screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury.
-
Press to unlock all keys and buttons.
>> All keys and operation buttons are unlocked, and the previous screen is displayed.
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.