XT27
![]() |
Veelgestelde vragen en probleemoplossing |
![](/g/b/img/product/hf_xt27euk.jpg)
XT27
Datum: 27/07/2012 Nummer: faqh00000477_006
How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
When sewing gathers or darts, you can draw up the lower thread by hand so that some thread will be left over.
Before you draw up the lower thread, put the bobbin back in.
- Turn off the machine.
- Raise the presser foot lever.
(1) Presser foot lever
- Remove the bobbin cover.
(1) Bobbin cover
- Reinstall the bobbin.
- Pass the thread along the slit in the direction of the arrow, and leave it there without cutting it.
- While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle.
- Pull on the upper thread to draw up the lower thread.
(1) Upper thread
(2) Lower thread
- Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.
(1) Upper thread
(2) Lower thread
- Replace the bobbin cover.
(1) Groove
(2) Projection
HF27, HF37, XT27, XT37
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.