LS-1217

Veelgestelde vragen en probleemoplossing

LS-1217

Datum: 17/01/2011 Nummer: faqh00000477_000

Raise the presser foot and the needle to their highest positions.
With your left hand, hold the end of the upper thread.
With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position.
The upper thread should have caught the lower thread in a loop.
Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.

Upper thread

Lower thread loop
Pull out about 15 cm (6") of both threads and place them toward the back of the machine straight behind the presser foot.
The upper thread should pass between the toes of the presser foot.

Upper thread

Lower thread