Innov-is A50
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hf_inova50euk.jpg)
Innov-is A50
Date: 02/11/2020 ID: faqh00000059_001
"E2" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The Start/Stop button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
- The Reverse/Reinforcement stitch button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
- The foot controller is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
Solution
Raise the buttonhole lever before continuing the operation.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.