MFC-L8690CDW
Veelgestelde vragen en probleemoplossing |
MFC-L8690CDW
Datum: 27/04/2017 Nummer: faq00003168_014
Unpack your Brother machine
Follow the steps below to unpack the machine:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Cut the plastic straps.
-
Remove all of the plastic box joint caps.
-
Lift to remove the box lid.
-
Remove the power cord.
-
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
Remove the telephone line cord.
-
Remove the packing foam.
-
Lift the machine using two people, remove the rest of the box, and place the machine on a flat surface.
To prevent possible injuries, at least two people should lift the machine.
-
Remove the plastic bag.
Open the document cover and remove the plastic sheet.
Peel off all blue tape.
-
Open the front cover.
-
Pull out the drum unit and toner cartridge assembly.
-
Remove all the orange packing material from the drum unit and toner cartridge assembly.
-
Peel off all blue tape.
-
Make sure you remove all the orange packing material from the drum unit and toner cartridge assembly.
-
Place the drum unit and toner cartridge assembly back into the machine.
-
Close the front cover.
-
Peel the blue tape from the paper support flap.
-
Pull the paper tray out of the machine.
-
Remove the silica gel pack from the paper tray.
-
Push the paper tray completely into the machine.
Verwante vragen
DCP-L8410CDW, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T)
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.