FAQ et Diagnostic

Fermer

MFC-J1300DW

FAQ et Diagnostic

FAQ et Diagnostic

Date: 19/12/2022 ID: faq00003059_001

After replacing an ink cartridge, "No Ink Cartridge" or "Cannot Detect" is shown and I cannot print.

If a replacement ink cartridge is not installed correctly, this issue may occur.
Remove the ink cartridge and re-install it slowly and firmly until it locks into place.

 

Follow the steps below to reinstall the ink cartridge:

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Insert the ink cartridge in the direction of the arrow on the label.
    Insert the ink cartridge in the direction of the arrow on the label
  2. Gently push the area marked "PUSH" until the ink cartridge locks into place.
    Gently push the area marked "PUSH" until the ink cartridge locks into place

    We recommend using genuine Brother supplies to ensure stable print quality and performance. Although not all non-genuine supplies may cause quality issues, using non-Brother supplies or refilling ink cartridges with third party ink, may adversely affect print quality or cause the machine to malfunction. The Brother limited warranty does not apply to any problem caused by the use of third party supplies.

Modèles apparentés

DCP-J1050DW, DCP-J1100DW, DCP-J1140DW, DCP-J1200W(E), HL-J6000DW, HL-J6100DW, MFC-J1010DW, MFC-J1300DW, MFC-J4335DW(XL), MFC-J4340DW(E), MFC-J4535DWXL, MFC-J4540DW(XL), MFC-J5945DW, MFC-J6945DW, MFC-J6947DW

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.