MFC-L2720DW
Veelgestelde vragen en probleemoplossing |
MFC-L2720DW
Datum: 11/05/2015 Nummer: faq00002647_003
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The Fax to server may be On and this may cause the issue.
To resolve the issue make sure that Fax to server is Off. There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.
Choose the appropriate way and follow the steps below.
Method 1: Using the control panel
-
Press (Settings) > All Settings > Network > Fax to Server.
-
Press On.
-
Press Prefix.
-
Enter the prefix (up to 40 characters) using the keyboard on the LCD, and then press OK.
-
Press Suffix.
-
Enter the suffix (up to 40 characters) using the keyboard on the LCD, and then press OK.
- Press (Home).
Method 2: Using the Web Based Management
-
Start your web browser.
-
Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is your machine's IP address).
For example: http://192.168.1.2/
-
Click Fax and Fax to Server.
-
Choose Off.
- Click Submit.
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.