Veelgestelde vragen en probleemoplossing

Sluiten

HL-4070CDW

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

HL-4070CDW

Niet uw product?

Datum: 15/01/2013 Nummer: faq00002192_003

I configured the "IP Config" method of the machine to "Auto" to assign an IP address automatically, however it was changed to "Static" unexpectedly. I get an error message that indicates that the IP address is not unique, or a document is printed out on a different machine.

When wireless network connection is unstable and the APIPA protocol is enabled, you might experience this difficulty.

Please follow these steps below to set the BOOT method back to AUTO and disable the APIPA protocol.


  1. Make sure that the power cord is plugged in.
  2. Turn on the printer and wait until the printer is in the Ready state.
  3. Press the + or - button to select LAN or Network, and press OK.
  4. Press + or - button to select WLAN, and press OK.
  5. Press + or - button to select TCP/IP, and press OK.
  6. Press + or - button to select Boot Method, and press OK.
  7. Press + or - button to select Auto, and press OK.
  8. Press + or - button to select APIPA, and press OK.
  9. Press + or - button to select Off, and press OK.
  10. Press Cancel.

Verwante vragen

Verwante modellen

HL-3070CW, HL-4070CDW, HL-4570CDW, HL-4570CDWT

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden