DCP-J1200W(E)
Veelgestelde vragen en probleemoplossing |
DCP-J1200W(E)
Datum: 27/05/2021 Nummer: faq00000460_521
Reset Your Machine
The following reset functions are available.
Machine Reset
You can reset all the machine’s settings that you have changed, such as Date and Time.
- Press (STOP) and MONO COPY simultaneously.The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
- Press and hold MONO COPY for two seconds.The machine restarts.
Network
Reset the print server back to its default factory settings (includes Password and IP Address information).
- Press (Wi-Fi) and (STOP) simultaneously.The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts blinking.
- Press and hold COLOUR COPY for two seconds.The machine restarts.
All Settings
Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
- Press (STOP) and MONO COPY simultaneously.The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
- Press and hold COLOUR COPY for two seconds.The machine restarts.
DCP-J1200W(E)
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.