DCP-9015CDW
Veelgestelde vragen en probleemoplossing |
DCP-9015CDW
Datum: 14/02/2013 Nummer: faq00000366_026
Out of Memory
There are some cases when the machine's display shows the message Out of Memory. Follow the solution suitable for your case.
NOTE: Available functions differ depending on the models.
- Case 1: If a secure print operation (printing the secure data) is in process:
Press (Cancel) and delete the previously stored secure print data.
- Case 2: If a print operation is in process:
Do one of the following:
- Reduce the print resolution.
- Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.
- Reduce the print resolution.
- Case 3: If a fax sending or copy operation is in progress:
Do one of the following:
- Press Send Now, Partial Print or Quit to send or copy the scanned pages.
- Press (Cancel) and wait until the other operations in progress finish, and then try again.
- Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.
- Press Send Now, Partial Print or Quit to send or copy the scanned pages.
DCP-9015CDW, DCP-9020CDW, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.