HL-1212W
 |
FAQ et Diagnostic |
HL-1212W
Date: 25/07/2014 ID: faq00000105_035
Reset the network settings to the factory default
You can use your machine's On/Off button to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management.
-
Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
-
While holding down
(Power On/Off), open and close the top cover.
-
Release
(Power On/Off). Make sure that all the LEDs turn off.
-
Press
(Power On/Off) six times.
The machine will restart.
HL-1212W
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.