RJ-4030
 |
FAQs & Troubleshooting |
RJ-4030
Date: 01/10/2019 ID: faqp00100030_006
Can I print out the printer settings?
You can use the 
(Feed) button to print a report that lists the following printer settings:
- Program version
- Printer usage history
- Missing dot test pattern
- RJ Utility setting information
- List of transferred data
- Network setting information
- Wi-Fi® setting information
- You can use the RJ Utility to set in advance which items will be printed.
- The node name appears in the Printer Settings. The default node name is “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is based on your printer’s MAC Address / Ethernet Address.)
- Make sure that a roll of 4" (101.6 mm) receipt paper has been loaded and the RD Roll compartment cover is closed.
-
Turn on the printer.
-
Press and hold the (Feed) button until the POWER indicator starts blinking in green. The settings will be printed.
- To print the Printer Settings, we recommend to use 4" (101.6 mm) receipt paper.
- This operation can also be performed using the RJ Utility.
RJ-4030, RJ-4040
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.