NC-7100w
 |
FAQs & Troubleshooting |
NC-7100w
Date: 14/05/2013 ID: faq00000393_001
I cannot see NC-7100w network name (SSID) "SETUP" in the list when using Mac OS X 10.1 to 10.3. What should I do?
If you are unable to see NC-7100w network name (SSID) "SETUP" in the list when using Mac OS X 10.1 to 10.3, check the following:
-
Move your printer with the print server installed closer to your PC and try again.
-
Reset the print server back to its default factory setting and try again. For information how to reset to factory default setting, click here.
-
Follow the steps below according to your operating system version, Mac OS X 10.1 to 10.3.
-
Click the AirPort status icon and select Open Internet Connect....
-
Select Create Network... from the Network option.
-
Enter SETUP, select 11 from the Channel option, and then click OK.
-
Your wireless network is connected successfully.
-
You can now use the Brother Wireless Setup Wizard to configure your print server settings.
NC-7100w
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.