FAQs & Troubleshooting

Close

Innov-is NV180D

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is NV180D

Not your product?

Date: 21/07/2017 ID: faqh00100747_000

How do I adjust thread tension for embroidering?

The upper thread tension is changed using the thread tension dial.
When doing machine embroidery, the tension dial should be set somewhere between 2 to 6.

img01 (1) Loosen (Decrease the number)
(2) Tighten (Increase the number)
(3) Thread tension dial

If the stitches appear loose, turn the tension up one notch and embroider again.

 

 




Correct thread tension

The thread tension is correct when upper thread is just visible on the wrong side (bottom) of the fabric.

img02 (1) Right side (top) of fabric
(2) Wrong side (bottom) of fabric

 

 

 

 

Upper thread is too tight

The bobbin thread will be visible on the right side (top) of the fabric. In this instance, decrease the upper thread tension.

img03 (1) Right side (top) of fabric
(2) Wrong side (bottom) of fabric

 

 

 

 

Upper thread is too loose

The upper thread has slack. In this instance, increase the upper thread tension.

img04 (1) Right side (top) of fabric
(2) Wrong side (bottom) of fabric

 

 

If the upper thread is not threaded correctly or the bobbin is not installed correctly, it may not be possible to set the correct thread tension. If the correct thread tension cannot be achieved, rethread the upper thread and insert the bobbin correctly.

 

 

 

 

 

Related Models

Innov-is NV180, Innov-is NV180D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.