FAQs & Troubleshooting

Close

Innov-is NV180D

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is NV180D

Not your product?

Date: 21/07/2017 ID: faqh00100273_006

How do I adjust a stitch width or length?

This machine is preset with the default settings for the stitch width, stitch length and "L/R Shift" for each stitch. However, you can change any of the settings by pressing Manual adjust key in the utility stitch screen.

image

After changing the settings, press OK to return to the utility stitch screen.

  • Press Default settings key to return the setting to its default.

    image

     

  • If the straight stitch or triple stretch stitch was selected, changing the stitch width changes the needle position. Increasing the width moves the needle to the right; reducing the width moves the needle to the left.

     

  • image or image means the setting cannot be changed.

    image

  • After adjusting the stitch width or the "L/R Shift", slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
  • If the stitches are bunched together, increase the stitch length. Continuing to sew with the stitches bunched together may result in the needle bending or breaking.

 

Setting the stitch width

The stitch width (zigzag width) can be adjusted to make the stitch wider or narrower.

image

Each press of - makes the zigzag stitch narrower.
Each press of + makes the zigzag stitch wider.

 

Setting the stitch length

The stitch length can be adjusted to make the stitch coarser (longer) or finer (shorter).

image

Each press of - the stitch length finer (shorter).
Each press of + makes the stitch length coarser (longer).

 

Setting the "L/R Shift"

The placement of the zigzag stitch can be adjusted to move the stitch to the right or left.

image (1) Placement of the stitch pattern

 

Saving stitch settings

If you wish to save specific settings for a stitch so that they can be used later, press key after changing the settings to save the new settings with the selected stitch.

image

Press key to return the setting to its default. If key is then pressed, the default settings are saved to the machine instead of the former settings.

 

Related FAQs

Related Models

Innov-is M370, Innov-is M380D, Innov-is NV180, Innov-is NV180D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.