FAQs & Troubleshooting

Close

DC200

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 04/08/2020 ID: faqh00100931_003

Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.

There are 2 CanvasWorkspace applications that allow you to create and edit cutting or drawing pattern data on a Brother cutting machine.

 

For CanvasWorkspace for PC, go to CanvasWorkspace for PC.

You can download the CanvasWorkspace from the Downloads section. Click here to visit the download page.

image

 

 

For CanvasWorkspace for Web, go to CanvasWorkspace for Web.

If you use Tablet, go to CanvasWorkspace for Web.

image

 

 

 

 

CanvasWorkspace for PC

 

A pattern can be sent to a cutting machine using the following methods.

 
 

 

Sending via a wireless network connection


A pattern created in CanvasWorkspace can be sent via a wireless network connection to a cutting machine, where it can be cut out.
Before sending data with this method, the following setup operations must be performed.
 



 

  1. In CanvasWorkspace, create the pattern to be cut out (or drawn).

    image


     
  2. Select [Export / Transfer FCM File] from the [File] menu.

    image


     
  3. Select the file [Transfer FCM File via the internet] .
    The pattern data is transferred to the cutting machine.

    image


     
  4. Click OK.

    image
     

    If the following screen appears, register your machine on CanvasWorkspace for Web.

    For details,  refer How to register Your Machine with CanvasWorkspace

    image



     
  5. Start up DesignNCut Manager, and then click Load data.

    image


     
  6. Click Load from CanvasWorkspace.

    image


     

  7. Check that the data sent to the cutting machine in step 2 appears.
    Specify the settings for “Operation”, “Speed” and “Pressure”, and then click Apply.

    image



     

  8. Attach the material to the mat, and then insert the mat into the cutting machine.

     
     
  9. Install the blade holder.

     

     

  10. In DesignNCut Manager, click Start to start cutting (or drawing).
     

    Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).


     

 

 

Sending using a USB cable

 

 

  1. Connect the computer and cutting machine with a USB cable.
    The "Removable Disk" icon appears in "Computer (My computer / This PC)" on the computer.
     
    image

    (1) USB port for computer

    (2) USB cable connector

     

     

  2. In CanvasWorkspace, create the pattern to be cut out (or drawn).

    image


     

  3. Select [Export / Transfer FCM File] from the [File] menu.

    image


     

  4. Select the file [Export FCM File] .

    image
     

     

  5. Save the pattern data to “Removable Disk”.
    The pattern data is converted to cutting data and saved as an FCM file.


     

  6. Start up DesignNCut Manager, and then click Load data.

    image


     
  7. Click Select file.

    image

     

  8. Select the data saved in step 2.


     

  9. Check the pattern, specify the settings for “Operation”, “Speed” and “Pressure”, and then click Apply.

    image


     

  10. Attach the material to the mat, and then insert the mat into the cutting machine.


     

  11. Install the blade holder.


     

  12. In DesignNCut Manager, click Start to start cutting (or drawing).

     

    Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).



     

Related FAQs

Related Models

DC200

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.