FAQs & Troubleshooting

Close

TJ-4020TN

FAQs & Troubleshooting

FAQs & Troubleshooting

TJ-4020TN

Not your product?

Date: 10/12/2021 ID: faqp00100468_002

How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer

Follow the instructions below:

 

  1. Turn off the printer.

  2. Press and hold the Pause button, and then turn on the printer.

  3. For the Black Mark Sensor
    Release the button when the LED is lit in green/amber (5 times) after the green LED blinks five times alternately.

    For the Gap Sensor
    Release the button when the LED is lit in red/amber (5 times) after the green/amber LED blinks five times alternately.

You can also calibrate by using the BPM (Brother Printer Management Tool).

Related Models

TJ-4020TN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.