PJ-563
 |
FAQs & Troubleshooting |
PJ-563
Date: 14/01/2015 ID: faqp00001454_000
The paper is jammed in the printer.
<Method 1>
Press and hold the green Main Power switch.
The drive motor will start and move slowly for a few seconds, then move faster as long as you hold the switch down. This can be repeated as many times as necessary.
If this does not move the jammed paper out of the printer, use " Method 2" below.
<Method 2>
-
Gently open the release cover as far back as it will go.
-
Gently pull the paper out of the printer. Pulling in either direction is acceptable.
- Close the release cover.
- Reinsert a new sheet of paper in the printer and restart the job. <see the FAQ: How to insert paper>
PJ-522, PJ-523, PJ-562, PJ-563
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.