Innov-is XP1
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovxp1eas.jpg)
Innov-is XP1
Date: 09/08/2018 ID: faqh00101024_001
Tips for sewing thick fabrics
The machine can sew fabrics up to 6 mm (approx. 1/4 inch) thick. If the thickness of a seam causes sewing to occur at an angle, help guide the fabric by hand and sew on the downward slope.
- Do not forcefully push fabrics more than 6 mm (approx. 1/4 inch) thick through the machine. This may cause the needle to break and cause injury.
- Thicker fabrics require a larger needle. Refer to Combination of fabric, thread and needle.
If the Fabric does not Fit under the Presser Foot
If the presser foot is in the up position, and you are sewing heavyweight or multiple layers of fabric which do not fit easily under the presser foot, use the presser foot lever to raise the presser foot to its highest position. The fabric will now fit under the presser foot.
You cannot use the presser foot lever after the presser foot has been raised using the Presser Foot Lifter button.
If the Fabric does not Feed
If the fabric does not feed when starting to sew or when sewing thick seams, press the black button on the left side of presser foot J.
-
Raise the presser foot.
-
While keeping the black button on the left side of presser foot J pressed in, press the Presser Foot Lifter button to lower the presser foot.
-
Release the black button.
>> The presser foot remains level, enabling the fabric to be fed.- Once the trouble spot has been passed, the foot will return to its normal position.
- When Automatic Fabric Sensor System (Automatic Presser Foot Pressure) in the machine settings screen is set to ON, the thickness of the fabric is automatically detected by the internal sensor so the fabric can be fed smoothly for best sewing results.
Related FAQs
Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP2, Innov-is XP3, Innov-is XV8500D, Innov-is XV8550D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.