FAQs & Troubleshooting

Close

Innov-is XJ2

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is XJ2

Not your product?

Date: 29/07/2019 ID: faqh00101020_002

How to adjust the thread tension

 

You may need to change the thread tension, depending on the fabric and thread being used. Follow the steps below to make any necessary changes.
image

 

Press image to return the thread tension to the original setting.

 

 

 

Proper Thread Tension

The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and only the bobbin thread should be visible from the wrong side of the fabric.

image (1) Wrong side
(2) Surface
(3) Upper thread
(4) Bobbin thread

 

 

 

 

Upper Thread is Too Tight

If the bobbin thread is visible from the right side of the fabric, the upper thread is too tight.

If the bobbin thread was incorrectly threaded, the upper thread may be too tight. In this case, refer to How do I set the bobbin ? and rethread the bobbin thread.

image (1) Bobbin thread
(2) Upper thread
(3) Surface
(4) Locks appear on surface of fabric
Press image , to loosen the upper thread.

 

 

 

 

Upper Thread is Too Loose

If the upper thread is visible from the wrong side of the fabric, the upper thread is too loose.

If the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to How do I thread my machine ? and rethread the upper thread.

image (1) Upper thread
(2) Bobbin thread
(3) Wrong side
(4) Locks appear on wrong side of fabric
Press image , to tighten the upper thread.

 

Related FAQs

Related Models

Innov-is XJ1, Innov-is XJ2

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.