Innov-is I / Innov-is 6000D
 |
FAQs & Troubleshooting |
Innov-is I /
Innov-is 6000D
Date: 14/05/2015 ID: faqh00000391_002
The "Pivot" key can not be selected.
-
If "NEEDLE POSITION-UP/DOWN" in the machine settings screen is set to the raised position, the pivot function cannot be used. In that case, the key appears as a dotted line and is not available.
In the following procedures, please change setting.-
Press
. -
On the machine settings screen, select
for the "NEEDLE POSITION-UP/DOWN".
-
Press
-
When the setting is selected, the pivot function can only be used with stitches where presser foot J, N, C or O is indicated in the upper-left corner of the screen.
If any other stitch is selected, the key appears as a dotted line and is not available.
Please change the stitch.
Innov-is 6700D, Innov-is 6750D, Innov-is I / Innov-is 6000D
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.