MFC-J432W
 |
FAQs & Troubleshooting |
MFC-J432W
Date: 27/11/2019 ID: faq00100637_010
Print command (LPR) (Linux)
CUPS Users Only
The LPR command is not available in CUPS. To configure your machine, use your application's print dialog box or the CUPS web interface "http://localhost:631/printers".
Print Command :
lpr -P (printer name) (filename)
Configuration Command :
brprintconf_(model name) [Option]
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W： brprintconf_mfcj430w
Option Table
| Function | COMMAND | Parameter Example |
| Media | -md[parameter] | -md Plain |
| Resolution | -reso[parameter] | -reso Normal |
| Bi-Dir Printing | -bidir [parameter] | -bidir ON |
| Paper Type | -pt[parameter] | -pt A4 |
| Paper Thickness | -thick[parameter] | -thick Thick |
| Color Or Mono | -corm[parameter] | -corm Mono |
| Color Matching | -cm [parameter] | -cm Vivid |
| Jpeg Printing | -jpeg [parameter] | -jpeg Recommended |
| Half Tone | -ht [parameter] | -ht Diffusion |
| Color Enhance | -ce [parameter] | -ce ON |
| Slow Drying | -sd [parameter] | -sd ON |
| reverse order | -rev [parameter] | -rev ON |
| MirrorPrint | -mirro [parameter] | -mirro ON |
| Duplex | -duplex [parameter] | -duplex DuplexTumble |
| Duplex Mode | -duplexmode [parameter] | -duplexmode Duplex1 |
| Brightness | -brit [parameter] | [-20 - +20] |
| Contrast | -cont [parameter] | [-20 - +20] |
| Red Key | -red [parameter] | [-20 - +20] |
| Green Key | -green [parameter] | [-20 - +20] |
| Blue Key | -blue [parameter] | [-20 - +20] |
DCP-J525W, DCP-J725DW, DCP-J925DW, MFC-J430W, MFC-J432W, MFC-J625DW, MFC-J825DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.