MFC-7420
 |
FAQs & Troubleshooting |
MFC-7420
Date: 29/01/2019 ID: faq00100619_000
When I scan multiple page documents using the ADF, all pages are feeded, but only page 1 shows in XSANE. (Linux)
For XSANE 0.98 or earlier :
You will have to modify the multipage scanning option in XSANE.
In XSANE, click on Preferences, Setup, Enhancements. Change the "Automatic document Feeder Modus:" from "None" to " Automatic Document Feeder".
For XSANE 0.99 or later :
You will have to indicate the number of pages. Increase the number in the box at the top left corner on the XSANE main window.
DCP-110C, DCP-115C, DCP-120C, DCP-130C, DCP-135C, DCP-145C, DCP-150C, DCP-165C, DCP-185C, DCP-195C, DCP-330C, DCP-350C, DCP-375CW, DCP-385C, DCP-395CN, DCP-540CN, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7040, DCP-8020, DCP-8025D, DCP-9010CN, DCP-9040CN, DCP-9042CDN, DCP-J125, DCP-J315W, DCP-J515W, DCP-J715W, FAX-1820C, FAX-1840C, FAX-2480C, FAX-2820, FAX-2850, FAX-2920, MFC-210C, MFC-215C, MFC-235C, MFC-240C, MFC-250C, MFC-255CW, MFC-260C, MFC-290C, MFC-295CN, MFC-3220C, MFC-3240C, MFC-3360C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-4800, MFC-490CW, MFC-5440CN, MFC-5460CN, MFC-5490CN, MFC-5840CN, MFC-5860CN, MFC-5890CN, MFC-620CN, MFC-640CW, MFC-6490CW, MFC-665CW, MFC-685CW, MFC-6890CDW, MFC-7220, MFC-7340, MFC-7420, MFC-7440N, MFC-7820N, MFC-7840W, MFC-790CW, MFC-795CW, MFC-8220, MFC-8370DN, MFC-8440, MFC-8460N, MFC-8820D, MFC-8840D, MFC-885CW, MFC-8860DN, MFC-8880DN, MFC-8890DW, MFC-9120CN, MFC-9125CN, MFC-9160, MFC-9180, MFC-9320CW, MFC-9325CW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9660, MFC-9840CDW, MFC-9880, MFC-990CW, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W, MFC-J615W
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.