FAQs & Troubleshooting

Close

MFC-790CW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-790CW

Not your product?

Date: 27/01/2011 ID: faq00002759_000

Erase the messages stored in my Brother machine's built-in Message Center.

To erase the messages stored in your Brother machine's built-in Message Center (TAD), follow one of these procedures:


 

SECTION A: ERASING VOICE MESSAGES INDIVIDUALLY

- If your Brother machine has the PLAY/RECORD or PLAY key on its control panel:
  1. Press the PLAY/RECORD or PLAY key.

  2. Press the ERASE while the message is playing.

  3. Press YES to confirm.

  4. Press the STOP/EXIT key.

- If not:
  1. Press button1(Message Center) or button2(Digital TAD) on the touch screen.

  2. Press ICM.

  3. Press the UP OR DOWN ARROW to display the message you want to delete.

  4. Press the message you want to delete.

  5. Press ERASE key while the message is playing.

  6. Press YES to confirm.

  7. Press the STOP/EXIT key.

 

SECTION B: ERASING ALL VOICE MESSAGES AT ONCE

- If your Brother machine has the ERASE key on its control panel:
  1. Press the ERASE key.

    The LCD will ask you if you want to delete all messages.

  2. Press YES to confirm.

  3. Press the STOP/EXIT key.

- If not:
  1. Press button1(Message Center) or button2(Digital TAD) on the touch screen.

  2. Press ICM.

  3. Press ERASE ALL.

    The LCD will ask you if you want to delete all messages.

  4. Press YES.

  5. Press the STOP/EXIT key.

Related Models

MFC-790CW, MFC-795CW, MFC-990CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.