MFC-9125CN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc9125cn_us_as.jpg)
MFC-9125CN
Date: 15/10/2010 ID: faq00002541_004
Clean the paper pick-up roller
Follow the steps below to clean the paper pick-up roller.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Turn off the machine's power switch. Unplug the power cord from the AC power outlet.
- Pull the paper tray completely out of the machine.
- Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad(1) of the paper tray with it to remove dust.
- Wipe the two pick-up rollers(1) inside of the machine to remove dust.
- Put the paper tray back in the machine.
- Plug the machine's power cord back into the AC power outlet. Turn on the machine's power switch.
DCP-9010CN, DCP-9055CDN, MFC-9120CN, MFC-9125CN, MFC-9320CW, MFC-9325CW, MFC-9460CDN, MFC-9970CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.