NC-2100p
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/nc2100p_all.jpg)
NC-2100p
Date: 31/10/2006 ID: faq00002384_000
Installing the Print Server.
- Turn off the printer power switch.
![](/g/b/img/faqend/faq00002384_000/au/en/7346/swtoff2.gif)
- Connect the NC-2100p to the parallel port located on the back of the printer.
![](/g/b/img/faqend/faq00002384_000/au/en/7347/cnt2.gif)
- Connect the Power cord from AC adapter to the NC-2100p.
![](/g/b/img/faqend/faq00002384_000/au/en/7348/cntpwcd_1.gif)
- Connect the network interface cable to NC-2100p, and then connect it to a free port on your hub.
![](/g/b/img/faqend/faq00002384_000/au/en/7349/cntifcbl2.gif)
- Plug the AC Adapter into an AC outlet, and then turn the printer power switch on.
![](/g/b/img/faqend/faq00002384_000/au/en/7350/swton2.gif)
NC-2100p
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.