MFC-7240
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7240_us_as.jpg)
MFC-7240
Date: 21/06/2012 ID: faq00000356_010
How do I store received faxes in memory?
If you set Fax Storage to ON, your FAX/MFC will hold all incoming faxes in memory until either you opt to print or delete them. The LCD will indicate when you have a fax stored in memory. Additionally, if there is paper in your machine and Fax Storage is enabled, then your FAX/MFC will automatically print each fax as it is received into memory. This is a safety feature to ensure that you will have a backup copy of each fax in case the machine loses power and the messages are lost.
To turn Fax Storage ON, please follow these steps:
- Press Menu.
- Press the Up or Down arrow key to choose Fax and press OK.
- Press the Up or Down arrow key to choose Remote Fax Opt and press OK.
- Press the Up or Down arrow key to choose Fwd/Page/Store or Forward/Store and press OK.
- Use the Up or Down arrow key to choose Fax Storage (or Off if you wish to disable Fax Storage). Press OK.
- Press Stop/Exit.
If your received faxes are not printing, make sure Fax Storage is turned Off.
FAX-2840, FAX-2950, MFC-7240
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.