FAQs & Troubleshooting

Close

MFC-9460CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9460CDN

Not your product?

Date: 01/11/2010 ID: faq00000231_034

Wrinkle

Wrinkle

 

Please check the following points to solve the problem:
NOTE: Illustrations shown below are from a representative product, and may differ from your Brother machine.

  1. Check the machine's environment. Conditions such as high humidity and high temperatures may cause this print quality problem.

  2. Check that you use the paper that meets our specifications. Click here to see the details of the recommended paper.

  3. Make sure that the media type settings in the printer driver and in the machine's Paper Type menu match the type of paper you are using.

  4. Make sure that the two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.
    Gray levers in the up position


    If you use thick paper and still have the problem, we recommend trying to print with the two gray levers pulled down as shown below.
    Gray levers in the envelope position

  5. Make sure that the back cover is closed properly.
    Closed back cover

  6. The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.

 


 


Related Models

DCP-9055CDN, MFC-9460CDN, MFC-9970CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.